Anode Swap

Anode Swap is a Perth based company servicing the greater Perth metropolitan area, the south west and the Goldfields. We specialise in the supply and fitting of sacrificial anodes to all makes of gas, electric & solar hot water systems. We also replace hot and cold water pressure relief valves. We are a fast, reliable service. Call or email us for your free inspection.

Anode Swap – The Hot Water System Anti-corrosion Experts
We are a Perth owned and operated company servicing the greater Perth metropolitan area, the South West of Western Australia and the Goldfields.

Anode Swap was formed to help households get the longest life from their storage hot water systems. Often a hot water system will need replacing prematurely simply because the sacrificial anode has not been replaced leading to tank failure.

Regularly replacing the sacrificial anode is by far the most cost effective method of extending the life of your storage hot water system and ensuring you have good quality hot water for your family.

We specialise in the supply and fitting of Sacrificial anodes in all makes of gas, electric and solar hot water systems. We also replace hot and cold water pressure relief valves.

So give us a call on 0447 956 230 for your obligation free inspection and extend the life of your system.

What is a Sacrificial Anode and why are they necessary?
An anode is a magnesium rod which is designed to corrode instead of your hot water system tank, hence the name sacrificial. Every tank comes with one and they usually only last 3-5 years. Once depleted, corrosion of your tank commences. Regularly replacing the anode can triple the life of your hot water system.

Hot and Cold Water Valves
As part of your obligation free inspection we check your hot water systems valves. If one or both are not working correctly we offer advice and can replace if required

We replace Valves on a wide selection of models. There are a number of reasons that a valve may need replacing.

Dirt and grit may prevent the valve seat closing properly – you may also have a higher water pressure than your current valve is rated for – there may also be issues with water temperature.

You may notice a continuing dribble of water or a steady flow of water or a heavy flow of water.

It is important that valves are checked regularly and replaced when faults are discovered.

Please visit our FAQ section for more detailed information.

An anode is a magnesium rod inside your hot water tank and is the only thing that protects your tanks steel cylinder from severe corrosion resulting in premature tank failure. Every hot water tank comes with one and they usually only last 2-5 years. Once your anode is depleted there is nothing to stop the destructive effects of corrosion on your tank. Keep the tank you’ve got and look after it. Replace the anode and it will l last up to 3 times as long. If your hot water tank is over 4 years old then you need to replace the anode now.

We service all major brands of hot water system including Rheem, Vulcan, Dux, Beasley, Aquamax, Saxon, Bosh, Solarhart, Quantum, Conergy, Zip and Supakwik.